|
|
|
Forming the “limber channels” for passing cockpit drainage to the rear of the boat |
||||||||||||||||||||||
![]() |
||||||||||||||||||||||
|
Steve and I discuss strategy |
||||||||||||||||||||||
![]() |
||||||||||||||||||||||
|
Laying out the polyester |
||||||||||||||||||||||
![]() |
||||||||||||||||||||||
|
Ginny does the fiberglass/epoxy layup. |
||||||||||||||||||||||
![]() |
||||||||||||||||||||||
|
Sanding before bonding the bulkheads with a fillet |
||||||||||||||||||||||
![]() |
||||||||||||||||||||||
|
projecting an oblique angle of the planned curvature of the bulkhead. This was a truly innovative method by Steve. |
||||||||||||||||||||||
![]() |
||||||||||||||||||||||
|
Roughed in lazarette out of the boat for trimming. |
||||||||||||||||||||||
![]() |
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||